J MaxGAS & PLUMBING

Reliable plumber and Gas Safe engineer in Derby

Boiler installation and repair, central heating, emergency plumbing, gas safety checks and bathroom fitting for homeowners, tenants and landlords across Derby, Ashbourne, Burton upon Trent and Uttoxeter.

  • Gas Safe registered
  • Based in Derby
  • Clear quotes before work starts

Your local plumber and gas engineer in Derby

J Max Gas & Plumbing LTD is a Derby plumbing and heating business. We look after boilers, radiators, bathrooms, leaks and gas safety, so one call covers most of what goes wrong or needs upgrading in a home or rental property.

Plumbing and gas problems are rarely convenient. A boiler fails in January, a pipe leaks over a weekend, a landlord needs a certificate before a new tenant moves in. Our job is to find the real cause quickly, explain it in plain English, give you a price before we start, and leave the work tested, safe and tidy.

We work with homeowners, tenants, landlords and small commercial premises, and we would rather advise against work you do not need than sell it to you.

Gas and plumbing in one team

Boiler, pipework, radiators and bathrooms handled together, with no passing between trades.

Honest diagnosis

We explain what has failed, what the options are and what each costs before you commit.

Local and easy to reach

A Derby business with a direct phone number and email, not a call centre.

Plumbing and gas services in Derby

Seven services, one local team. Each one can be enquired about directly, and we will advise if you are not sure what you need.

Boiler installation

Supply and fitting of new gas boilers, including replacing an old, unreliable or inefficient boiler.

  • Boiler, flue and pipework fitted
  • System flush and safe commissioning
  • Controls and thermostat set up

Solves: repeated breakdowns, rising bills and end-of-life boilers.

Enquire

Boiler repair and servicing

Fault finding, repairs and annual servicing to keep your heating and hot water safe and dependable.

  • No heating or hot water, low pressure, noises, leaks
  • Safety and efficiency checks
  • Annual service visits

Solves: winter breakdowns that could have been caught early.

Enquire

Central heating

Radiators, valves, thermostats and pipework repaired, replaced or rebalanced so every room heats properly.

  • Radiator and valve replacement
  • Cold spots, slow heat-up and system flushing
  • Thermostats and controls

Solves: cold radiators and uneven, expensive heating.

Enquire

Gas safety checks

Gas safety inspections for homeowners and landlords, covering appliances, pipework and ventilation.

  • Landlord gas safety record
  • Gas appliance and flue checks
  • Clear written report

Solves: legal compliance and the worry of an unchecked appliance.

Enquire

Bathroom fitting

Plumbing-led bathroom installation, from swapping a single suite to a complete refit.

  • Baths, showers, toilets, basins and taps
  • Pipework alterations and connections
  • Leak testing before handover

Solves: tired bathrooms, poor water flow and awkward layouts.

Enquire

General plumbing repairs

Dripping taps, leaking pipes, toilet faults, low water pressure and appliance connections.

  • Repairs, replacements and new installs
  • Washing machine and dishwasher connections
  • Stopcock and valve work

Solves: small faults before they become costly damage.

Enquire

Emergency plumbing

Burst pipes, major leaks, blocked drains, no water or no heating. We make the situation safe, stop the damage and then repair it or explain the next step. If you smell gas, leave the property and call the National Gas Emergency Service on 0800 111 999 first or call J Max Gas & Plumbing your local plumbing and gas service provide in Derby and it's surrounding 40 miles areas..

Call 07950 195869

Why customers choose J Max Gas & Plumbing

Good plumbing is mostly good habits: turn up, diagnose properly, explain clearly, finish neatly.

Gas Safe registered engineers

Gas work in Great Britain must be done by a registered engineer. Ours is, and you are welcome to check ID on the official Gas Safe Register.

Workmanship we stand behind

Every job is pressure tested or safety checked before we leave, and we are easy to reach if anything needs a second look.

Plain-English advice

You will know what failed, why, and what your options are, without jargon or pressure to upgrade.

Clear pricing

We agree the price before work begins and tell you early if something unexpected changes it.

Respect for your home

Dust sheets, tidy tools and a clean finish. It is your property and we treat it that way.

Local knowledge

We know the housing around Derby and Derbyshire, from older properties with ageing pipework to modern flats and new builds.

How a job works, from first call to handover

  1. Tell us what is wrong

    Call or use the form with your postcode and a short description. Urgent problems get priority.

  2. Diagnosis and quote

    We find the cause, explain the options and give you a clear price before any work starts.

  3. Repair or installation

    The work is carried out neatly, then tested and made safe before we pack up.

  4. Handover and advice

    We show you what was done, how to use it and what to watch for in future.

Areas we cover around Derby

We provide plumbing, heating and gas services in Derby and the towns around it. Every service on this page is available across the whole area.

  • Derby
  • Ashbourne
  • Burton upon Trent
  • Uttoxeter
  • Wider East Midlands

Not sure whether your address is covered? Send your postcode through the form and we will confirm.

How do I find a reliable plumber near me?

Most people search for a plumber when something has already gone wrong: a leak under the sink, a boiler that will not fire, a bathroom that has had its day. That is exactly when it is hardest to judge who to trust. This guide gives you a simple way to choose a plumbing service in Derby and the surrounding area, what to check before you book, and which warning signs to walk away from.

The short answer

A reliable plumber is local, contactable, properly registered for the work they do, open about price, and willing to put the quote in writing. Check reviews for recent, specific detail, confirm Gas Safe registration for anything involving gas, compare what each quote includes, and avoid anyone who pressures you to decide on the spot.

The rest of this page explains each of those checks so you can use them for any plumbing service, whether it is a small repair or a full installation.

Seven steps to a reliable plumber

  1. Start with local businesses. A plumber with a genuine Derby address, a working phone number and a consistent online listing is easier to hold accountable than an anonymous advert. Check that the name, address and phone number match across their website and listings.
  2. Read reviews for detail, not stars. Look for recent comments that mention turning up on time, explaining the problem, fair pricing and tidiness. A handful of specific, believable reviews tell you more than a perfect score with no detail.
  3. Check the right credentials. Gas, boiler and gas appliance work requires Gas Safe registration. For other plumbing, ask about insurance and relevant training or qualifications.
  4. Describe the job properly. Give the postcode, what is happening, how long it has been happening and what you have already tried. A good plumber will ask sensible questions rather than guessing.
  5. Get the quote in writing. It should describe the work, say whether parts are included, and explain how any extra work would be agreed.
  6. Ask about aftercare. Find out how the work is guaranteed and how you reach them if something is not right afterwards.
  7. Trust your instincts about communication. Clear, polite and honest answers before the job usually mean clear, polite and honest work during it.

Do I need a Gas Safe registered engineer?

Yes, for any work on gas pipework, boilers, gas fires, hobs or other gas appliances. In Great Britain, it is a legal requirement for anyone carrying out gas work to be on the Gas Safe Register. Poor gas work can cause gas leaks, fires and carbon monoxide poisoning, which is why this is the one check you should never skip.

How to check

  • Ask to see the engineer's Gas Safe ID card when they arrive.
  • Check that the card covers the type of work being done, such as boilers or cookers.
  • Confirm their registration on the official Gas Safe Register using their licence number.

A plumber who is not gas registered can still fix taps, pipes, toilets and drains. They cannot legally work on the gas side of your boiler.

Which plumbing service do I need?

Knowing what kind of help you need makes it easier to describe the job and compare quotes. The table below shows the main types of plumbing service and how urgent each usually is.

Common plumbing services compared
Type of helpTypical situationsHow urgent
Emergency plumbingBurst pipe, major leak, no water, overflowing toilet, no heating in cold weatherAct immediately
Plumbing repairsDripping taps, slow drains, faulty toilet, low pressure, leaking radiatorSoon, before damage spreads
Plumbing installationNew bathroom, boiler replacement, taps, showers, appliancesPlanned, so compare quotes
Gas safety and servicingAnnual boiler service, landlord gas safety checkScheduled, with fixed deadlines for landlords

When you are dealing with emergency plumbing you will not have time to compare, which is why it helps to know a trusted local name before you need one. For plumbing repairs and planned installations you can take a day or two to gather quotes.

How should I compare plumbing quotes?

Compare what is included, not just the total. Prices vary with the job, the parts, how easy the work is to reach and when it needs doing, so we do not list typical figures here. Instead, ask each plumber these questions:

  • Is the price fixed or an estimate, and what could change it?
  • Are parts and materials included, and who supplies them?
  • Is there a call-out or diagnostic charge, and is it deducted if you go ahead?
  • How long will the work take, and is waste removal included?
  • What guarantee applies to the work?

The cheapest quote is not always the best value. A very low price can mean cheaper parts, shortcuts or extras added later.

Red flags to avoid

  • No local address, or only a mobile number and no company details.
  • Unable or unwilling to show Gas Safe ID for gas work.
  • Refusing to put a quote in writing.
  • Demanding full payment up front for ordinary repairs.
  • Pressure to decide immediately on non-urgent work.
  • Reviews that are all vague, identical or posted on the same day.
  • Recommending a full replacement before explaining why a repair will not work.

What should I do in a plumbing emergency?

  1. Turn off the water at the stopcock, usually under the kitchen sink or near the front door.
  2. Switch off the boiler or immersion heater if the leak is on the heating or hot water system.
  3. Keep water away from electrics and move belongings out of harm's way.
  4. Open taps to drain the system if the stopcock has been shut.
  5. Call a plumber and describe what is happening.

If you smell gas: do not use switches, naked flames or your phone indoors. Open windows, turn off the gas at the meter if it is safe to do so, leave the property and call the National Gas Emergency Service on 0800 111 999 or Call J Max Gas & Plumbing your local plumbing and gas service provide in Derby and it's surrounding 40 miles areas.

Choosing a plumber locally in Derby

Derby and the surrounding towns have a mix of older terraces, 1930s semis, newer estates and flats, and each has its own typical plumbing issues, from ageing pipework and tired radiators to combi boilers that have reached the end of their life. A local plumber will have seen these before and will usually be quicker to diagnose them. Local firms also tend to depend on their reputation, which is a good reason to ask neighbours and friends for recommendations as well as reading reviews.

If you are a landlord, remember that gas appliances in rented homes need an annual gas safety check by a Gas Safe registered engineer, and tenants should receive a copy of the record. Choosing a plumber who can do both the gas safety certificate and the repairs saves time.

Quick questions

How do I know a plumber is genuinely local?

Look for a real Derby or Derbyshire address, a landline or mobile number that rings through to a person, and a clearly stated service area.

Is an emergency plumber more expensive?

Urgent call-outs can cost more because they interrupt planned work. Ask about the charge on the phone before the visit.

Can any plumber fix my boiler?

Only if they are Gas Safe registered for boilers. Many boiler faults involve gas components that only a registered engineer can legally work on.

Who is responsible for repairs in a rented home?

Check your tenancy agreement. Landlords are generally responsible for heating, hot water, pipework and gas safety, but responsibilities can vary.

Summary

To find a reliable plumber, shortlist local businesses, read reviews for detail, check Gas Safe registration for gas work, compare written quotes by what they include, and avoid pressure tactics. The best time to choose a plumber is before an emergency, when you can ask questions calmly.

If you are in Derby, Ashbourne, Burton upon Trent or Uttoxeter and need a dependable plumbing service, J Max Gas & Plumbing would be glad to help.

Request a quote

Frequently asked questions

Which areas do you cover?

We cover Derby, Ashbourne, Burton upon Trent, Uttoxeter and the wider East Midlands. If you are close to those areas, send your postcode and we will confirm.

Are you Gas Safe registered?

Yes. Our gas work is carried out by Gas Safe registered engineers. You can ask to see ID and check it on the official Gas Safe Register.

Do you handle plumbing emergencies?

Yes. Call 07950 195869 for burst pipes, major leaks, boiler failures or loss of water or heating. If you smell gas, call 0800 111 999 first.

Can you provide a landlord gas safety certificate?

Yes. We carry out landlord gas safety checks and provide the written safety record.

How much will my job cost?

It depends on the work, the parts and how easy the job is to access. We diagnose the problem, give a clear quote and agree the price before starting.

How long does a boiler installation take?

It depends on the system and the pipework, but a straightforward like-for-like replacement is often completed in a day. We confirm the timescale when we quote.

Do you fit complete bathrooms?

Yes, from replacing a single suite to a full refit. We handle the plumbing, pipework and connections and test everything before handover.

How often should a boiler be serviced?

Manufacturers generally recommend an annual service, which helps catch faults early and keeps the boiler running safely and efficiently.

How do I choose a reliable plumber?

Check they are local, confirm Gas Safe registration for gas work, compare written quotes and read reviews for specific detail. Our guide above covers each step.

How do I book?

Call 07950 195869, email admin@jmaxhomeservices.co.uk or complete the enquiry form below.

Need a plumber or gas engineer in Derby?

Call us or send the details. We will come back with advice and a clear quote.

  • Phone07950 195869
  • Emailadmin@jmaxhomeservices.co.uk
  • Address10 Cranesbill Cl, Derby DE3 0HH
Call now